E signal generator is a device intended for stimulation of elastic fluctuations (waves) which imitate acoustic emission signals at the object under test.
It is recommended for A-Line 32D (PCI-8E) AE systems.
- Pulse amplitude up to 300 V.
- Pulse rate range from 1 to 10 Hz.
- Possibility of setting the pulse emission time.
- Operation from battery and external power source.
- Low power consumption.
Characteristics:
|
General parameters |
|
|
Pulse amplitude range |
10 ÷ 30 V |
|
Pulse amplitude accuracy (for 20 to 300 V range) |
± 5 % |
|
Pulse rate range |
1 ÷ 10 Hz |
|
Pulse rate accuracy |
± 1 % |
|
Adjustable pulsing time |
1 ÷ 60 minutes |
|
Keypad and Display |
|
|
Number of keys |
4 |
|
Display type |
LCD |
|
Viewing area |
50x15 mm |
|
Display format |
24 (2x12) chars |
|
Weight and dimensions |
|
|
Size |
155x80x30 mm |
|
Weight |
0.3 kg |
|
Power |
|
|
Power supply voltage |
9 V |
|
Maximum power consumption |
0.05 watts |
|
Environment conditions |
|
|
Temperature range |
-20 to +70 °C |
|
Maximum relative humidity at 25°C |
95% |
Application:
AE signal generator can be used together with acoustic emission system in the following cases:
- Check of AE system workability;
- Calibration of acoustic emission sensors mounted at the controlled object;
- Determination of spreading speed and attenuation degree of elastic vibrations in the controlled object;
- Check of correct AE computation of acoustic emission sources by means of the location coordinate system just before control.
The AE signal generator (calibrator) is included to basic equipment sets:
- The automated diagnostic complex of side frames and spring beams of freight cars;
- The acoustic emission unit for control of oil and petrol cistern pots.
