Devclean Processor Cleaners

AGFA NDT DEVCLEAN is a highly effective two-part care product that provides thorough cleaning of the developer areas in the processors and tanks, as well as the accessories used in manual film development. Silver and sediment deposits on all parts dissolve quickly, completely and without difficulty.

Instructions for use:
NOTE. The silver content of DEVCLEAN, the water from the developer reservoir and the fixer waste may be sufficient to restore it, therefore DEVCLEAN should be processed for silver recovery.

1. Empty and thoroughly flush the tank, rack and recirculation system with clean water to remove all traces of fixer.

2. Drain the developer solution from the reservoir of the developing machine.

3. Do not remove the rack.

4. Partially fill the tank with water (about 35 ° C), add Part A and Part B, and then add water until the tank overflows. Turn on the recirculation pump (for mixing).

5. The cleaning time when the recirculation pump is running:

45 min at temperature ≤ 30 ° C
30 min at a temperature> 30 ° C
6. Completely empty the tank. Drain the spent DEVCLEAN solution to the fixer waste. The processed DEVCLEAN solution is acidic and contains silver ions (dissolved silver).

7. Before filling the tank with flushing water, rinse the tank and stand with tap water. Drain the wash water to the fixer waste.

8. Fill the tank with fresh tap water (about 15 ° C) and turn on the recirculation pump for 10 minutes.

9. Empty the tank and drain the flushing water to the fixer waste.

10. Fill the tank with fresh tap water (about 15 ° C) and turn on the recirculation pump for 5 minutes.

11. Empty the reservoir to the developer drain.

12. Flushing is complete. Close the reservoir drain hole, then fill it with fresh developer solution.