PAMIR-300 (ARINA-11) is the latest modification in the series of portable pulse flaw detectors of the ARINA series.
Its distinctive feature is a significantly higher radiation power compared with the ARINA-9 device with smaller dimensions and weight.
Its distinctive feature is a significantly higher radiation power compared with the ARINA-9 device with smaller dimensions and weight.
In addition, the continuous operation time of PAMIR-300 (ARINA-11) is 30 minutes per hour instead of 15 minutes, as in the currently available models from ARINA-3 to ARINA-9.
These advantages allow the use of PAMIR-300 (ARINA-11) to control the welding of gas trunk pipelines of the largest diameters using the panoramic method when using D7 X-ray film with lead reinforcing screens. At the same time, the exposure of the 1200 mm pipe radiography is 6–8 minutes, and the pipes 1,400 mm take 15–20 minutes. Naturally, the pipe of smaller diameters can be controlled in just a few minutes, which ensures the continuity of control during the working day.
The PAMIR-300 (ARINA-11) device was developed in 2011 and will be mass-produced starting from the first quarter of 2012, jointly by two companies Spectroflash LLC and Spectroimpuls LLC. Delivery of the device will be carried out only under contracts with LLC "Spectroimpuls".
Specifications:
The portable pulsed x-ray machine PAMIR-300 (ARINA-11) is intended for use as an X-ray source for non-destructive X-ray inspection of materials.
Operating conditions: in the temperature range from minus 40 to plus 50 ° С, atmospheric pressure 101.3 + 5.3-25.6 pPa (760 + 40-200 mm Hg), relative air humidity up to 98% at a temperature of plus 25 ° С and at lower temperatures without moisture condensation.
| PAMIR-300 | ||
| X-ray tube voltage amplitude | 300 | kV |
| Exposure dose of X-ray at a distance of (500 ± 20) mm from the end of the X-ray unit in a direct beam in 1.5 minutes, not less |
387 (1500) |
µC / kg (mR) |
| Steel thickness available for radiography with X-ray films with fluorescent intensifying screens | 85 |
mm |
| Steel thickness available for radiography with high contrast X-ray films | 45 |
mm |
| Pulse repetition rate | 10 | Hz |
|
Supply voltage: |
single phase ac network (220 ± 22) V (50 ± 1) Hz, 24V battery
|
|
| Continuous working time | 30 min / hour | |
| Weight and overall dimensions of the component parts, not more than: | ||
| X-ray unit | ||
| weight | 7,8 |
kg |
| length | 460 |
mm |
| width | 150 |
mm |
| height | 220 |
mm |
| Remote Control | ||
|
weight |
6,4 |
kg |
|
length |
375 |
mm |
|
width |
290 |
mm |
|
height |
85 |
mm |